Tactical  >  Product Types  >  Gear Care & Repair

Aquaseal UV® Ultraviolet Cure Adhesive

Aquaseal UV® Ultraviolet Cure Adhesive Bookmark and Share

 

  • Product Info

    Finally a UV curing adhesive worthy of the Aquaseal name! Aquaseal UV cures in seconds when exposed to the sun. Ideal for creating truly instant stream-side repairs! Solvent free formula works in both overcast or full light conditions. Stronger than any other UV curing adhesives - only regular Aquaseal is stronger.

  • Instructions for Use

       

    DIRECTIONS For small tears and pinholes on waders & outdoor gear. PREP: Apply to clean, dry surfaces. Clean surfaces with isopropyl alcohol to remove surface residue. Roughen smooth surfaces with sandpaper.

    APPLY: Apply Aquaseal UV in a fully shaded or covered area away from any sunlight. For best adhesion apply with pressure using needle nose or disposable stick to work AQUASEAL UV into material. Overlap damaged area by at least 1⁄4” (5mm). Replace cap immediately.

    CURE: After application, immediately expose item to sunlight. All repairs must be exposed to sunlight outdoors. Cures in approx. 30 sec. May take longer when cloudy. Thick repairs will take approx. 45 sec. to cure.

    NOTE: Glass will block UV rays needed for proper curing. For permanent repairs use Aquaseal® Urethane Repair Adhesive & Sealant.

  • Tips & Testimonials

    What is it? –

      When cured (dry) Aquaseal is a thick, clear, elastic urethane rubber.

    How does it work? –

      Aquaseal is applied to a hole or tear and cures from sunlight in minutes.

    Testimonials –

      "That stuff works great. I've used it. I've been impressed."-Bjorn

      "Saved my bacon on the Alagnak! Taking two next year!"- Gary Clark

You May Also Be Interested In...

Melco™ Heat Tape Melco™ Heat Tape ReviveX® Air Dry Waterproofing Spray ReviveX® Air Dry Waterproofing Spray Op Drops™ Anti-Fog & Lens Cleaning System Op Drops™ Anti-Fog & Lens Cleaning System Gear Aid™ Explorer Kit Gear Aid™ Explorer Kit

Find more great tips like these in our Repair Guide

  • High Speed, Field Repairs

    High Speed, Field Repairs

    For quick, grab-and-hold repairs in the field, opt for neoprene-based contact cement. Contact cements are formulated specifically for rapid tack and bonding. Seal Cement™ Neoprene Contact Cement cures to full strength in only 15 to 30 minutes and creates a strong, durable, flexible bond.
  • Boot Lacing Tip

    Boot Lacing Tip

    Relieve pressure and give your boots a custom fit with these lacing tricks. 1. Use “Skip Lacing” to take pressure off sensitive areas 2. Use the “Double Wrap” to have different levels of tightness on upper and lower sections of the boot.