Outdoor  >  Product Types  >  Seam Sealing & Gear Repair

Cotol 240™ Cleaner & Cure Accelerator

Cotol 240™ Cleaner & Cure Accelerator Buy Now Bookmark and Share

 

  • Product Info

    Better, faster gear repair through chemistry.

    Cotol-240 does two things to make gear repair faster and better: It makes Gear Aid urethane adhesives dry faster. And it cleans fabrics and surfaces before the repair so urethane adhesives can create maximal bond. Use Cotol-240 with SeamGrip®, Aquaseal®, and Freesole®.
    Works with SeamGrip, Aquaseal, and Freesole.

    The solvent cleans and prepares the surface, readying it for Aquaseal® , speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. Available in 1/2 oz. Blister Pack, 4 oz. and Quart (not shown).


    Cotol-240 is part of a comprehensive line of Care and Repair products from Gear Aid. With Gear Aid, anyone can be a master of gear repair.


    • Formulated for use with SeamGrip, Aquaseal, and Freesole
    • Speeds drying time to approximately 2 hours
    • Use as a pre-repair cleaner for maximum bond

  • Instructions for Use

     

    Cotol-240™ Directions for use with Aquaseal® Urethane Repair Adhesive, Seam Grip® Outdoor Repair Adhesive & Seam Sealer and Freesole® Urethane Repair Adhesive:

    AS PRECLEANER:

    1. Apply a small amount to the damaged area (spot test for colorfastness).

    2. Rub with a clean cloth until dry.

    3. Repeat steps 1 and 2.

    4. Apply Aquaseal as directed. Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.

    AS CURE ACCELERATOR:

    1. Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal® or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.

    2. Immediately apply the mixture to the damaged area.

    3. Allow the repair to completely cure at least 2 hours before using.

    FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.

    CLEAN-UP: To remove Aquaseal® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.

    STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.

  • Tips & Testimonials

    Testimonials –

      " I used the Cotol 240 cleaner to clean and prep the site first." - Pamela L.

      "Excellent for all kinds of dry and wetsuit repairs."- Al, Lakewood, NJ

      "Absolutely essential item if repairing wetsuits or drysuits with AquaSeal. It thins out the AquaSeal so you can easily apply it with a brush and makes all repairs easy and professional looking."- Kevin M.

      "I used this to clean and prep the site before using Aquaseal cement, it did a very good job."- Pamela L.

You May Also Be Interested In...

Tent Sure™ Tent Floor Sealant Tent Sure™ Tent Floor Sealant Freesole® Urethane Formula Shoe Repair Freesole® Urethane Formula Shoe Repair Aquaseal Urethane Repair Adhesive & Sealant Aquaseal Urethane Repair Adhesive & Sealant ReviveX® Climbing Rope Cleaner Concentrate ReviveX® Climbing Rope Cleaner Concentrate

Find more great tips like these in our Repair Guide

  • DWR Finish

    DWR Finish

    All rainwear is factory treated on the outside with a special water repellent spray called DWR (for “Durable Water Repellent”). Over time that treatment wears off causing fabrics to “wet out” – which reduces breathability and creates excess condensation, making you damp and cold. ReviveX water repellents are unique because they bond to both the fabric and any remaining factory DWR creating the most durable water repellent finish available.
  • Keep the Bugs Out!

    Keep the Bugs Out!

    When it’s breezy, mosquitoes will congregate on the lee side of objects to avoid being blown away. So pitch your tent door into the breeze. You’ll be able to enter without bringing the swarm in with you.