Cotol_240™ Cleaner & Cure Accelerator

Cotol_240™ Cleaner & Cure Accelerator Bookmark and Share

 

  • Product Info

    Cotol-240™ Cleaner & Cure Accelerator is a urethane cure accelerator and pre-cleaner to be used in conjunction with Aquaseal® or . The solvent cleans and prepares the surface, readying it for Aquaseal® , speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. Available in 1/2 oz. Blister Pack, 4 oz. and Quart (not shown).

  • Instructions for Use

     

    Cotol-240™ Directions for use with Aquaseal® Urethane Repair Adhesive, Seam Grip® Outdoor Repair Adhesive & Seam Sealer and Freesole® Urethane Repair Adhesive:

    AS PRECLEANER:

    1. Apply a small amount to the damaged area (spot test for colorfastness).

    2. Rub with a clean cloth until dry.

    3. Repeat steps 1 and 2.

    4. Apply Aquaseal as directed. Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.

    AS CURE ACCELERATOR:

    1. Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal® or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.

    2. Immediately apply the mixture to the damaged area.

    3. Allow the repair to completely cure at least 2 hours before using.

    FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.

    CLEAN-UP: To remove Aquaseal® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.

    STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.

  • Tips & Testimonials

    Testimonials –

      " I used the Cotol 240 cleaner to clean and prep the site first." - Pamela L.

      "Excellent for all kinds of dry and wetsuit repairs."- Al, Lakewood, NJ

      "Absolutely essential item if repairing wetsuits or drysuits with AquaSeal. It thins out the AquaSeal so you can easily apply it with a brush and makes all repairs easy and professional looking."- Kevin M.

      "I used this to clean and prep the site before using Aquaseal cement, it did a very good job."- Pamela L.

Other Items In This Category

Find more great tips like these in our Repair Guide

  • Additional Uses

    Additional Uses

    Camo Form® can also be used to wrap accessory cords and other items. You can wrap knife handles, canteens, flashlights, dog collars, binoculars and anything else you may want to camouflage or protect.
  • Stove Tip

    Stove Tip

    If your butane stove is struggling in cold weather, set it in a pot lid and add 3/4” (15mm) of cool water. The stove will roar to full power (the fuel is now at least 32˚ F, 0˚ C). Do not use hot water in the lid.