Dive  >  Product Types  >  Watersport Gear Repair

Cotol-240™ Cleaner & Cure Accelerator

Cotol-240™ Cleaner & Cure Accelerator Bookmark and Share

 

  • Product Info

    Better, faster gear repair through chemistry.

    Cotol-240™ does two things - it makes urethane adhesives dry faster, and it cleans fabrics and surfaces before the repair so urethane adhesives can create maximum bond. Use Cotol-240 with Aquaseal® for fast, permanent wetsuit and dry suit repairs.

    The solvent cleans and prepares the surface, readying it for Aquaseal® , speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal.

    • Formulated for use with Aquaseal
    • Speeds drying time to approximately 2 hours
    • Use as a pre-repair cleaner for maximum bond

  • Instructions for Use

     

    Cotol-240™ Directions for use with Aquaseal® Urethane Repair Adhesive, Seam Grip® Outdoor Repair Adhesive & Seam Sealer and Freesole® Urethane Repair Adhesive:

    AS PRECLEANER:

    1. Apply a small amount to the damaged area (spot test for colorfastness).

    2. Rub with a clean cloth until dry.

    3. Repeat steps 1 and 2.

    4. Apply Aquaseal as directed. Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.

    AS CURE ACCELERATOR:

    1. Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal® or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.

    2. Immediately apply the mixture to the damaged area.

    3. Allow the repair to completely cure at least 2 hours before using.

    FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.

    CLEAN-UP: To remove Aquaseal® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.

    STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.

  • Tips & Testimonials

    Testimonials –

    "Excellent for all kinds of dry and wetsuit repairs."- Al, Lakewood, NJ

    "Absolutely essential item if repairing wetsuits or drysuits with Aquaseal. It thins out the Aquaseal so you can easily apply it with a brush and makes all repairs easy and professional looking."- Kevin M.

    "I use Cotol-240 to clean and prep the site before using Aquaseal, it does an excellent job."- Pamela L.

You May Also Be Interested In...

Iron Mend™ Repair Patch Kit Iron Mend™ Repair Patch Kit Aquaseal Urethane Repair Adhesive & Sealant Aquaseal Urethane Repair Adhesive & Sealant Seal Cement™ Contact Cement for Neoprene Seal Cement™ Contact Cement for Neoprene Diver's Value Pack Diver's Value Pack

Find more great tips like these in our Repair Guide

  • Gasket Protection

    Gasket Protection

    With exposure to sunlight, saltwater, and chlorine, synthetic gaskets degrade over time due to the loss of structural oils called plasticizers. Proper protection with UV Tech™ is essential for maximizing scuba gear life.
  • Dive Gear Repair

    Dive Gear Repair

    Broken zipper tooth on a dive gear bag? Stitch the damaged section closed to prevent further separation until you can repair properly or replace.