Sporting Goods  >  Product Types  >  Gear Aid ™ & Camping Products

Cotol-240™ Precleaner & Cure Accelerator

Cotol-240™ Precleaner & Cure Accelerator Bookmark and Share

 

  • Product Info

    Better, faster gear repair through chemistry.

    Cotol-240™ does two things - it makes urethane adhesives dry faster, and it cleans fabrics and surfaces to ensure maximum bond. Use Cotol-240 with Seam Grip®, Aquaseal® and Freesole® for fast, permanent repairs.

    The solvent cleans and prepares the surface, readying it for the urethane adhesive, speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal.

    • Formulated for use with Seam Grip, Aquaseal and Freesole
    • Speeds drying time to approximately 2 hours
    • Use as a pre-repair cleaner for maximum bond

  • Instructions for Use

     

    Cotol-240™ Directions for use with Aquaseal® Urethane Repair Adhesive, Seam Grip® Outdoor Repair Adhesive & Seam Sealer and Freesole® Urethane Repair Adhesive:

    AS PRECLEANER:

    1. Apply a small amount to the damaged area (spot test for colorfastness).

    2. Rub with a clean cloth until dry.

    3. Repeat steps 1 and 2.

    4. Apply Aquaseal as directed. Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.

    AS CURE ACCELERATOR:

    1. Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal® or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.

    2. Immediately apply the mixture to the damaged area.

    3. Allow the repair to completely cure at least 2 hours before using.

    FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.

    CLEAN-UP: To remove Aquaseal® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.

    STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.

  • Tips & Testimonials

    Testimonials –

    "Excellent for all kinds of dry and wetsuit repairs."- Al, Lakewood, NJ

    "Absolutely essential item if repairing wetsuits or drysuits with Aquaseal. It thins out the Aquaseal so you can easily apply it with a brush and makes all repairs easy and professional looking."- Kevin M.

    "I use Cotol-240 to clean and prep the site before using Aquaseal, it does an excellent job."- Pamela L.

You May Also Be Interested In...

Freesole® Urethane Formula Shoe Repair Freesole® Urethane Formula Shoe Repair Tenacious Tape™ Repair Tape Tenacious Tape™ Repair Tape Outgo™ Smart Suds™ Soap Outgo™ Smart Suds™ Soap Blakely™ Outdoor & Dive Knife Blakely™ Outdoor & Dive Knife

Find more great tips like these in our Repair Guide

  • Sleeping Pad Repairs

    Sleeping Pad Repairs

    Clean and dry area to be repaired. Apply Seam Grip® to cover the hole and spread 1⁄4” (5mm) beyond. Allow to dry level overnight.
  • Stove Tip

    Stove Tip

    If your butane stove is struggling in cold weather, set it in a pot lid and add 3/4” (15mm) of cool water. The stove will roar to full power (the fuel is now at least 32˚ F, 0˚ C). Do not use hot water in the lid.