Cotol_240™ Cleaner & Cure Accelerator

Cotol_240™ Cleaner & Cure Accelerator Bookmark and Share

 

  • Product Info

    Cotol-240™ Cleaner & Cure Accelerator is a urethane cure accelerator and pre-cleaner to be used in conjunction with Aquaseal® or . The solvent cleans and prepares the surface, readying it for Aquaseal® , speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. Available in 1/2 oz. Blister Pack, 4 oz. and Quart (not shown).

  • Instructions for Use

     

    Cotol-240™ Directions for use with Aquaseal® Urethane Repair Adhesive, Seam Grip® Outdoor Repair Adhesive & Seam Sealer and Freesole® Urethane Repair Adhesive:

    AS PRECLEANER:

    1. Apply a small amount to the damaged area (spot test for colorfastness).

    2. Rub with a clean cloth until dry.

    3. Repeat steps 1 and 2.

    4. Apply Aquaseal as directed. Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.

    AS CURE ACCELERATOR:

    1. Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal® or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.

    2. Immediately apply the mixture to the damaged area.

    3. Allow the repair to completely cure at least 2 hours before using.

    FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.

    CLEAN-UP: To remove Aquaseal® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.

    STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.

  • Tips & Testimonials

    Testimonials –

      " I used the Cotol 240 cleaner to clean and prep the site first." - Pamela L.

      "Excellent for all kinds of dry and wetsuit repairs."- Al, Lakewood, NJ

      "Absolutely essential item if repairing wetsuits or drysuits with AquaSeal. It thins out the AquaSeal so you can easily apply it with a brush and makes all repairs easy and professional looking."- Kevin M.

      "I used this to clean and prep the site before using Aquaseal cement, it did a very good job."- Pamela L.

Other Items In This Category

Find more great tips like these in our Repair Guide

  • Silicone Treated Fabrics

    Silicone Treated Fabrics

    If you have a tent, tarp or pack made from silicone coated fabric, seal with SilNet™. SilNet is the only seam sealer that will bond to silicone treated fabric.
  • Tent Condensation Tip

    Tent Condensation Tip

    Minimize condensation in tents by keeping upper tent vents open, and lower vents clear of sleeping bags, pads and other bulky items.