Gear Aid™ Wader Wash Bookmark and Share

 

  • Product Info

    Specialized Cleaner for All Waders. Stinky waders are no one’s friend. Use Wader Wash to eliminate odors and remove stains from all types of fabric and rubberized waders. Unlike home detergents, it won’t clog the pores of waterproof breathable waders. By removing grime, it actually helps factory waterproof coatings work better. Wader Wash is part of a comprehensive line of Care and Repair products from Gear Aid. With Gear Aid, anyone can be a master of gear care and repair.

  • Instructions for Use

     

    Specialized Cleaner for All Waders


    • Enhances the performance of waterproof breathable waders
    • Helps water repellent treatments work better
    • Concentrated, biodegradable formula

    Also ideal for all types of rainwear (including breathable), fleece and synthetic insulated clothing and fishing vests.

    One of more than 100 Care and Repair products from Gear Aid.

    GENERAL DIRECTIONS:

    1. Fill a sink, bathtub or large container with enough warm or cold water to submerge item.

    2. Shake bottle before use. Spot clean heavily soiled areas.

    3. Add 1/2 oz (2 inner capfuls) Gear Aid Wader Wash and stir.

    4. Submerge item in tub, knead briefly to saturate all areas. Soak item for 10 minutes.

    5. Wash item by gently kneading all areas to remove dirt and stains.

    6. Rinse until water runs clear.

    DRYING: TFollow garment manufacturer’s drying directions. If directions are unavailable, hang waders inside-out to dry interior, then reverse to dry outside. Allow to dry thoroughly before use or storage.

    STORAGE: Cap bottle tightly and store in a cool, dry place.

  • Tips & Testimonials

    Testimonials –

      -

You May Also Be Interested In...

ReviveX® Soft Shell Water Repellent ReviveX® Soft Shell Water Repellent ReviveX® Spray-On Water Repellent ReviveX® Spray-On Water Repellent ReviveX® Synthetic Fabric Cleaner ReviveX® Synthetic Fabric Cleaner ReviveX® Down Cleaner ReviveX® Down Cleaner

Find more great tips like these in our Repair Guide

  • Tent Hole Repairs

    Tent Hole Repairs

    Seam Grip® permanently repairs common pinholes and tears in the tent floor. Apply just enough Seam Grip to cover the hole and spread 1/4” (5mm) beyond. Allow to dry level overnight. For 2 hour cure time, mix Seam Grip with Cotol-240™ before applying.
  • Paddlesports Tip

    Paddlesports Tip

    Kayak cockpits are notorious for cutting into spray skirts and causing exterior cracking. Apply spot applications of Aquaseal to permanently repair and protect both the interior and exterior.