Clean and dry all surfaces.
Remove old seam sealer with stiff bristle brush and isopropyl alcohol.
Shake well before use. Remove inner foil. Pull brush top open.
Squeeze bottle gently and apply a thin, even film to stitching on coated side of fabric (or inside of item). Use brush to work into needle holes, sewn joints, corners and under lap-felled and folded seams.
Clean drips and excess with damp cloth.
ALLOW TO FULLY DRY before use or folding (minimum 2 hours at room temperature; longer if colder). Test for dryness before use.
CLEAN-UP & STORAGE: Close brush top and wash bristles with soap and water immediately after use; stiff bristles may be loosened with lacquer thinner. Store in a cool, dry place.
SPECIAL
APPLICATIONS & TIPS:
Tent Seam Sealing:
Perimeter seams on ‘seam taped’ tents are not factory sealed and require sealing. Apply a thin film of SeamSure to inside floor seams (fig.1). Allow to dry overnight.
Use SeamSure to seal areas that regularly leak, such as stake-out points at corners (fig. 2).
To seal the seams on your rainfly, set it up inside-out for easier application. Attach the rainfly to the tent so all seams are taut (fig. 3).