Apply from tube or with brush.
Seam Sealing:
1) CLEAN surfaces with isopropyl alcohol.
2) APPLY SilNet to inside of seam: apply thin film across taut threads and under folds.
3) LET DRY 3-6 hours. Test before use or folding.
Adhesive Applications: Roughen and clean surfaces. Apply SilNet to both surfaces. Allow to dry 15 minutes, then join (clamp or tape) surfaces together overnight.
NOTE: Fully cured SilNet may cling to itself when folded. After first application, lightly dust fully cured areas with ProTalc™ High Performance Dry Lubricant and Protectant or talcum powder.
CLEAN UP AND STORAGE: Wipe tube threads. Advance contents to tube neck and replace original cap securely. Store in cool, dry place. Clean hands with soap and water.