Tenacious Sealing & Repair Tape holds tenaciously!
Our super aggressive adhesive sticks to almost any surface and can be used for a variety of flexible, long lasting repairs at home or in the field! Our non-gloss matte finish is almost invisible, eliminating the need to match colors on fabric and other materials. Tenacious Sealing & Repair Tape stops rips from spreading and acts as abrasion resistance on high wear areas of garments and gear. Tenacious Sealing & Repair Tape can also be used in conjunction with McNett® Urethane Adhesives for ultra strong repairs. Provides fast, long lasting repairs on synthetic and natural fabrics, fleece, vinyl, rubber and plastic. Ideal for: tents, rain gear, tarps, wind wear, backpacks, gaiters, sleeping bags, gloves, stuff sacks, mats and pads, seats, awnings, soft coolers, tablecloths, PFDs, boat covers, inflatable toys, emergency bicycle tire repairs & more.
Directions:
Clean and dry area to be repaired. Trim loose threads. Join torn edges of material.
For smaller repairs, cut tape for appropriate size, allowing overlap of repair of at least 1 inch (25mm) in all directions.
Round the edges of tape for best adhesion.
Remove paper backing and apply to damaged area over hard, flat surface. May be applied to outside surface or inside surface depending upon cosmetic preference, or both sides for the highest performance repair.
After applying, rub with pressure using circular motion from center out. Item may be used immediately. Adhesive reaches full strength in 24 hours.
Adhesive Option: If more permanent repairs are desired. Tenacious Tape can be used with Seam Grip® or Aquaseal® Urethane Adhesives. If used in this manner, follow adhesive application instructions and overlap the adhesive with Tenacious Tape by at least 1 inch (25mm).
Once adhesive is fully cured, the tape may be removed if desired. Storage and Care: Store unused portion of tape in sealed plastic bag.
Tenacious Tape is washable. Do not dry clean.